Merging Isis Betriebsanweisung PDF herunterladen (Seite 12)

ISIS User Guide : Chapter 3 - Power up and Initial Configuration

Page 12

•Make sure the Enable box is checked.

•Click on the OK button to close the dialog.

Note: Since ISIS communication is not demanding on network bandwidth, there should

be no need for a separate, dedicated, RJ-45 network connection. If more than one net-

work connection is present on the host computer, it is not currently possible to assign a

specific port to communicate with the ISIS Remote Controller. This function may be

added in a future software release.

If your Ethernet connection is via a router with a DHCP server or there is a DHCP server elsewhere on your net-

work, then this will automatically assign an IP address to the ISIS.

Otherwise, an internally saved IP address is used. To set this, please see the section, 'Setting the ISIS static IP

Address', on Page 16 in Chapter 4.

Note: Direct Ethernet connection of Workstations (i.e.: 1x VCube and 1x Pyramix) with

standard factory default DHCP settings and without a proper DHCP server available in

the network may lead to unexpected behavior, software and or system freezes. (ISIS will

default to fixed IP address, if no DHCP server is available). At all times proper, individual,

TCP-IP address for each machines, assigned either automatically (by a DHCP server, if

available) or manually (Fixed IP) are required.

This caution is not relevant for machines operating without a network connection.

•Click on the OK button at bottom left of the Pyramix Settings window to confirm the changes and close

the Window.

Congratulations! Your new ISIS Remote Controller is now ready for use.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 54 55

Keine Kommentare

Merging Isis Betriebsanweisung Seite 12