Merging Isis Betriebsanweisung PDF herunterladen (Seite 16)

ISIS User Guide : Chapter 4 - ISIS TC/IP Address Configuration

Page 16

For example TRACK KEY 1 = '1', TRACK KEY 2 = '2' ... TRACK KEY 10 = '0'

When the IP Address and Net Mask have been set as required, press the SET key (F12). This will save the IP address

and Net Mask as the internal static settings to be used if no other settings are assigned by DHCP.

After you press the SET key this screen appears:

Press the REBOOT key (F12) to reboot the ISIS (or switch the power-off and on again).

Note: The IP configuration can only be saved when there is an established electrical con-

nection between the ISIS and either a Pyramix workstation or Ethernet switch.

Viewing the IP Address

The currently assigned IP Address can be seen in the ISIS Configuration dialog (see image Chapter 5, first page).

Checking IP Configuration

To check the IP Configuration of the machine you are working on do the following: Open a Command Prompt win-

dow. (Start > All programs > Accessories > Command Prompt) then type in the following command: IPCONFIG

followed by Enter. The IP configuration for the machine will be shown like this:

Checking Network Connections

Using "Ping":

To check that the connections you have set up are operational do the following:

Open a Command Prompt window. (Start > All programs > Accessories > Command Prompt) then type in the

following command:

PING 192.168.0.3 (or whatever TCP/IP address is currently assigned to the workstation or device you wish to

check) followed by Enter then wait for the machine to reply. Repeat the process for all other connected Worksta-

tions / Controllers.

Using Windows Explorer:

In a Windows Explorer window, right-click on My Network Places and choose Explore > Entire Network /

Microsoft Windows Network / Workgroup or Domain (choose whichever is appropriate) then verify that all

Pyramix and VCube workstations can search/see each other on the network, including shared hard drives and

folders. Having all machines in the same "Workgroup" helps. (default workgroup is either "WORKGROUP" or

"MSHOME")

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 54 55

Keine Kommentare

Merging Isis Betriebsanweisung Seite 16